Stronger, Faster, and Brighter: this is the Alpenblow Lux! At only 13.7 grams (0.5 oz), the Lux gives you all the benefits of other, heavier pumps with a fraction of the noise & weight.

What's new:

2x faster inflation compared to the original Alpenblow Classic

80% more pressure compared to the original Alpenblow Classic

Dual reading lights for a cozy tent ambiance

Deflation port for faster camp breakdown

1/2 the energy usage per inflation compared to the original Alpenblow

While the original Alpenblow was made to be as-light-as-possible for UL pads, the Lux allows itself a few more grams to be the best all-around pad inflator: supporting thicker pads & extra tent illumination.

Specs:

Weight: 13.7 g (with Therm-a-Rest nozzle)

Energy Usage: 9 mAh @ 5V (NeoAir NXT)

Noise Level: 43dB at 30cm

Power: 2.4 W (fan) | 0.30 W (lamps)

Lamp Color Warmth: 1800 Kelvin

Includes Adapters for modern Therm-a-Rest WingLock, EXPED, NEMO, Big Agnes, and Sea-to-Summit. Zenbivy Flex & Ultralight pads also supported (not Light).

The Lantern Leash is also available separately, a 0.9 gram flexible strap to hold the Lux up against your NOBO, M!GO, or Thru Bottle.

Modes: (cycled thru by pressing triangular logo)

Inflate/Deflate - lights begin pulsing once pad is full & air is no longer flowing

Low Brightness Lamps

Medium Brightness Lamps

High Brightness Lamps

Candle Flicker - for when you want a flame where you can't have one

White Noise Machine - half-speed fan + 30 minute auto-shutoff

Ocean Surf Noise Machine - a calming ocean wave effect + 30 minute auto-shutoff

Off - or unplug at any time

FAQ:

How do I activate the light and other modes?

While the fan is running, just press the triangular logo

How do I turn the fan or light off?

Just unplug the Alpenblow Lux!

Can this be used with vacuum packing bags?

Unfortunately no, the negative pressure is sufficient to pull air out, not to compress clothing

Can I use the Alpenblow Lux with existing adapters I bought?

The Lux uses the same interface as the original Alpenblow, so they can share adapters or accessories

Is this product 3D-printed?

None of the Lux's components are printed, only the Lux Leash and some of the separately-purchased adapters use additive manufacturing

How do I stop my power bank from automatically turning off the lamps?

Some power banks turn off when the power draw is too low: press and hold the button for 3 seconds to enter a "defeat" mode where the fan quietly spins to draw sufficient power to defeat the auto-shutoff feature. Most phones don't have the feature so you can use that instead.

My INIU power bank isn't working with it over USB-C?

I'm addressing this issue with a new circuit board revision, if you have this issue please let me know! The Power Delivery negotiation with some specific INIU models isn't working, you can use USB-A to USB-C to work around or power via smartphone.

This product is molded & assembled in California. A USB-C cable is not included to reduce e-waste.