3D model for my Nomai Mask from Outer Wilds! 🪐

It will be very complex to print without a multicolor printer (ideally at least 4 colors), or you can print with one color if you paint it afterwards. It is also more fitting for an XL printer (I print everything with a Prusa XL printer) but you can print some parts in smaller parts or you can also reduce the mask size but you may have some adaptation to do afterwards.

There are all STL files you need to make it, and I've also included some PrusaSlicer 3MF project files you can optionally use if you want.

🔨 Technical details:

The precise dimensions it requires are 306x350mm of surface and 291mm height, or 571x312mm and 260mm for an included scaled down version

If you wanna print with multiple colors, you'll need to be able to print with 4 colors at a time

It requires making a circuit for it if you want the same LED animation as me, the circuit is composed with these elements :

Arduino UNO REV3

1000µF Capacitor

1KOhm Resistor

5V 15A 75W power supply

10 meters of a WS2812E LED strip with 60 pixels per meter

DC female plug